The PZ4 for Above Ground Pools
(Printable Brochure)
(Installation Manual)
120 Volt
240 Volt
Venturi Driven Ozonator For Small In-Ground Pools or
Above-Ground Pools up to 20,000 Gallons
The PZ4 has a dual-cavity, rugged anodized aluminum, line-grounded case
that stands vertically. It can be attached to the pack or mounted on the
wall. Under certain conditions it can even be set on the ground. Air is
supplied to the unit through filtering slots on the bottom to prevent
insects from getting inside the unit. The electrical system is completely
insulated internally in a separate sealed housing, and the ballast is
mounted high above the base. In the event water inadvertently enters the
ozone chamber, it simply runs past a completely insulated arc assembly and
out through the slotted input filter.
The PZ4 is easy to install with either a bypass or in-line venturi mixer
to provide maximum ozone absorption. The PZ4 ozone system for above-ground
pools is designed for quick turnkey installation. The in-line injection
system installs with simple connections — no cutting or drilling. Its rugged
construction meets the requirements for in-ground and above-ground
installations. The PZ4 is weatherproof and features an air filter/dryer
under the system. The clear gasketing glows when the system is on. The PZ4
system is rated for pools up to 20,000 gallons. It is Underwriter's
Laboratories Classified. The PZ4 has a two year hardware warranty on all
parts.
Standard System
110 VAC, 60 HZ; .4 amps
Dual 3-prong NEMA plug and receptacle outlet
Specifications
Operating Temperature: +25º F. to +140º F.
Shipping Weight: 9 lbs. (220/240 system: 11 lbs.)
Size: 10"x 7" x 6"
Case Construction: Polymer Coated/Anodized Aluminum Extrusion
Safe and Simple by Design
The PZ4 offers simple turnkey installation and features dual
electrical hookups for safe, easy electrical connections. Air is
supplied from the bottom of the unit through filtering slots to prevent
insects from getting inside the unit. The electrical system is
completely insulated internally in a separate sealed housing, and the
ballast is mounted high above the base.
Patents #5,075,016; #6,192,911; #6,426,053; #6,342,154 and patents
pending.
